I'm probably the last person in the hobby world to discover this website, but never mind, important is that I finally found it. And I must say, so far it looks fantastic.
I'm not talking about layout (even though it's clean and nice), but the selection of works you can find there. A serious source of inspiration. And the artists you can find there are not only CMON's 'top ten' but some new faces (at least for me).
So if you have a while give it a go and check the their website putty&paint.
After quick browse through the members list I can say that the amount of historical and modelling projects gives me a huge hope to learn there a lot. So I look forward for new 'eye candy' projects.
But I must also say, that it would be nice to compete with them and find out where my painting is according to their standards.
cheers
'eM
4 Dec 2012
Urmuth - quick photo
Not much to say. Still an early stage, still looking kinda messy. I managed to fix the fur a bit, but as much as I can see I still need to crank up the contrast quite a lot.
The skin on the picture looks like he's indulging himself in carrot and carrot juice, I know. But I hope I can get rid of this tint and make him look closer to normal;]
cheers
'eM
The skin on the picture looks like he's indulging himself in carrot and carrot juice, I know. But I hope I can get rid of this tint and make him look closer to normal;]
cheers
'eM
1 Dec 2012
Hall of Shame Part 4
Sadly I need to get back to the Hall of Shame and place few more miniatures here.
cheers
'eM
cheers
'eM
30 Nov 2012
Urmuth - WIP
As a part of the plan of reducing number of projects I'm working on simulatneously (and stop HoS from growing) I started another mini: Urmuth Scars of War from Andrea Miniatures:)
Still an early stage. I was working mostly on fur, leather skirt and shoes. The brighter parts of the fur are not even close to the final contast and brightness, but the colour of the skirt is close enough to what I was going for.
The skin and other elements are just basecoated.
So far it's a nice mniature to paint. Good cast and fine details (for more informations check Inbox I did few weeks ago) makes it a real pleasure, and almost every element gives the painter a chance to show the skills.
I do enjoy painting it to such an extent, that I might even finish it;p
cheers
'eM
Still an early stage. I was working mostly on fur, leather skirt and shoes. The brighter parts of the fur are not even close to the final contast and brightness, but the colour of the skirt is close enough to what I was going for.
The skin and other elements are just basecoated.
So far it's a nice mniature to paint. Good cast and fine details (for more informations check Inbox I did few weeks ago) makes it a real pleasure, and almost every element gives the painter a chance to show the skills.
I do enjoy painting it to such an extent, that I might even finish it;p
cheers
'eM
29 Nov 2012
Master of Imagination 'non-report'
I must admit, I'm not the best reporter and event photographer in the world:( I'm simply too busy experiencing the event, socialising with people and shopping/restraining myself from shopping, to take too many photos or to be to diligent when it comes to the quality of those I managed to take.
So... I don't really know what to say about the event itself, except I did enjoy myself there;]
Thank you guys so much for your hard work preparing this competition. Good work!
It was really nice to meet all the fellow painters and chat about miniatures for a while. Pity that this occasions are so rare for me.
But at least there are some pictures (not necessarily mine)
Here you can find official photos of the winning miniatures, and all entered pieces:
MoI - The winners
MoI - Gallery
And here is all I managed to take in good enough quality (at least part of the mini is in focus;p)
MoI - my pics
I know, I need to practice more photography on location and with horrible lighting. But I hope you can see at least something here.
But on the other hand, while taking photos like that I'm not thinking about artistic quality, or composition. I just need miniature to be sharp and big enough so I can learn sometning by looking at uncompressed file. And most of the photos here meets my expectations;]
cheers
'eM
So... I don't really know what to say about the event itself, except I did enjoy myself there;]
Thank you guys so much for your hard work preparing this competition. Good work!
It was really nice to meet all the fellow painters and chat about miniatures for a while. Pity that this occasions are so rare for me.
But at least there are some pictures (not necessarily mine)
Here you can find official photos of the winning miniatures, and all entered pieces:
MoI - The winners
MoI - Gallery
And here is all I managed to take in good enough quality (at least part of the mini is in focus;p)
MoI - my pics
I know, I need to practice more photography on location and with horrible lighting. But I hope you can see at least something here.
But on the other hand, while taking photos like that I'm not thinking about artistic quality, or composition. I just need miniature to be sharp and big enough so I can learn sometning by looking at uncompressed file. And most of the photos here meets my expectations;]
cheers
'eM
28 Nov 2012
Templar Knight - inbox
Just to finish off with the Templar Knight, little review:
Not much to say, really. Let's let the pictures speak for themselves.
And if you want to read a bit more about the company and my opinion of it, check the more indepth review I did on Viking Chief a while back.
The Mini:
Name: Templar Knight XII c.
Manufacturer: Pegaso Models
Product code: 90-053
Category: Crusaders
Sculptor: Andrea Jula
Material: White metal
Scale: 1:20 (90mm)
The box:
In the box:
Quality of the cast:
Great as always. And even there are some delicate mold lines, especially on the cloak, they're easy to get rid of. Just check every part carefully and everything should be ok:D
Assembly:
Again 21 parts, like with Viking, but this time it's seriously tricky. The miniature is very complex and in such a dynamic pose, so you need to plan very carefully which parts you're gonna glue together at the beginning and which later. From my experience I may say there is no one and easy answer.
I glued the body (torso, legs, collar and head), painted it more or less and then added lower part of the tunic painted (again more or less) inside. And added cloak (glued together) later. Arms and shield were added closer to the end.
Very important part is attaching the cloak. Because Templar stands on the stairs, and because the end the cloak basically lays on the steps, it's crucial that you glue it exactly how it supposed to be. Even slight mistake, a bit thicker layer of glue or maybe different angle can cause a huge problems. I didn't check if it fits right after attaching cloak, when the glue was still a bit wet and easier to remove, and ended up with a fully painted miniature that needed to be filed almost to the bone. I had to remove one fold of the cloak to make it fit into the steps. And trust me it's not something you'd like to experience:D You can read about it a bit more here.
Other Pegaso Models reviews:
Viking Chief
Iroquois
cheers
'eM
Not much to say, really. Let's let the pictures speak for themselves.
And if you want to read a bit more about the company and my opinion of it, check the more indepth review I did on Viking Chief a while back.
The Mini:
(c) Pegaso Models
Name: Templar Knight XII c.
Manufacturer: Pegaso Models
Product code: 90-053
Category: Crusaders
Sculptor: Andrea Jula
Scale: 1:20 (90mm)
The box:
In the box:
Quality of the cast:
Great as always. And even there are some delicate mold lines, especially on the cloak, they're easy to get rid of. Just check every part carefully and everything should be ok:D
Assembly:
Again 21 parts, like with Viking, but this time it's seriously tricky. The miniature is very complex and in such a dynamic pose, so you need to plan very carefully which parts you're gonna glue together at the beginning and which later. From my experience I may say there is no one and easy answer.
I glued the body (torso, legs, collar and head), painted it more or less and then added lower part of the tunic painted (again more or less) inside. And added cloak (glued together) later. Arms and shield were added closer to the end.
Very important part is attaching the cloak. Because Templar stands on the stairs, and because the end the cloak basically lays on the steps, it's crucial that you glue it exactly how it supposed to be. Even slight mistake, a bit thicker layer of glue or maybe different angle can cause a huge problems. I didn't check if it fits right after attaching cloak, when the glue was still a bit wet and easier to remove, and ended up with a fully painted miniature that needed to be filed almost to the bone. I had to remove one fold of the cloak to make it fit into the steps. And trust me it's not something you'd like to experience:D You can read about it a bit more here.
Other Pegaso Models reviews:
Viking Chief
Iroquois
cheers
'eM
27 Nov 2012
Pegasus Project - 'landscape after the battle'...
...and 3 days before the painting competition 'Masters of Imagination'...
There is really not much to say.
Mr Templar simply hates to fly, and as a form of protest he decided to break his sword, fall apart completely and lose some paint on top of that.
Because of the problems I had with the cloak and base (described few posts ago) I had no proper pins fixing him to the base. I'm guessing that's the main reason of the disaster. Normaly this kind of accident wouldn't be such a big deal, but away from my workbench, with only few basic paints, and without any pigments and special effects products it was quite a challenge to put him back together and prepare for a competition. And I'm really happy that I didn't give up, because he did very well, and now looks really nice in my Mum's cabinet (and the fact that sword is slightly bend is barely visible).
But I must say, I do hope that's the last accident of this sort that involve my miniatures. I most definitely need to be more careful in the future.
cheers
'eM
There is really not much to say.
Mr Templar simply hates to fly, and as a form of protest he decided to break his sword, fall apart completely and lose some paint on top of that.
Because of the problems I had with the cloak and base (described few posts ago) I had no proper pins fixing him to the base. I'm guessing that's the main reason of the disaster. Normaly this kind of accident wouldn't be such a big deal, but away from my workbench, with only few basic paints, and without any pigments and special effects products it was quite a challenge to put him back together and prepare for a competition. And I'm really happy that I didn't give up, because he did very well, and now looks really nice in my Mum's cabinet (and the fact that sword is slightly bend is barely visible).
But I must say, I do hope that's the last accident of this sort that involve my miniatures. I most definitely need to be more careful in the future.
cheers
'eM
Subscribe to:
Comments (Atom)