9 Jan 2014

Back from the 'dead'. Hopefully for good this time.

After months without the brush I finally felt like I'm ready to go back and paint with pleasure and some consistency. Well almost without the brush, I tried to paint from time to time, but it wasn't very successful. So right now after a few days with painting I really hope the 'dry spell' is over and I'll be creative again.

Because I'm not really a fan of preping miniatures, you know cleaning them, assembling, priming... Especially priming. I use Mr. Surfacer 1200, which smells really nice, but still is not the healthiest thing to inhale, so I need to use a mask and all that stuff, and it takes time... you know.
Well anyway, I decided to prepare bunch of miniatures, prime them at one go and be over with it for a while. Below you can see the minis I chose to be painted next. As you can see, mostly busts and bigger scale. I'm not quite sure if I knew what to do with 28mm mini right now:D

At this point, the minis are all primed and 'preshaded'. Because I use light gray primer, I couldn't just use white paint from the top to mimic zenithal lighting, it wouldn't be wisible enough. So first I applied a fairly diluted, dark gray paint from the bottom (+/- 45 degree), and then again diluted white from the top (+/- 45 degree). Thanks to that I can see much better lights and shadows on my miniatures, which should help me to build the volumes. The darker and brighter areas will also look a bit different when covered with paint, wihich is an additional help to the contrast.

And here the last step of my work with airbrush. Of course if I had all colour schemes planned out already I could do much more, but I'm still hesitating, so I did only flesh parts. Here again I applied first lights and shadows, but rest of the job will be done with the brush.


cheers

'eM

6 comments:

  1. Welcome back!

    Impressed by the pixellation paint...!

    Bob

    ReplyDelete
    Replies
    1. ];->
      you know:D it was a chalenge, I must admit:D

      Delete
  2. Nice to have you back! One of your miniatures is censored via pixelation on the screen, which one is it?

    ReplyDelete
    Replies
    1. I'm not sure if I can say what it is yet. But soon:D

      Delete
  3. I thought I had bought too many miniatures to paint, but there is someone who beats me :)

    ReplyDelete
    Replies
    1. Trust me, it's just the tip of the Iceberg... My gray army is vast and most likely unconquered

      Delete